Plastic Injection molding services
Having developed proprietary technology to optimise lead times, we can produce affordable injection moulded parts that can be delivered to you in just 15 days. We provide hard and soft tooling for production or prototype injection moulding and world-class design optimisation.And providing tool ownership alongside.
Production parts in just 8 days
130+ thermoplastic & elastomeric materials
Our custom injection molding capabilities
Thermose&Thermoplastic injection molding
Thermoplastic injection molding
tInjection blow molding
Injection blow molding
Overmolding / Two-shot molding
Overmolding / Two-shot molding
Compression molding
Micro injection molding
Insert molding
Injection molding materials
Lightweight (density: 0.9g/cm³), high-temperature resistant (100-120°C), fatigue-resistant
Impact-resistant, chemically corrosion-resistant, non-toxic; divided into high-density polyethylene (HDPE) and low-density polyethylene (LDPE)
Flame-retardant, good weather resistance; divided into rigid PVC (R-PVC) and flexible PVC (S-PVC)
Good transparency, easy to color, high rigidity, but brittle
High rigidity, impact-resistant, easy to process (platable), good surface gloss.
Ultra-high impact strength ("bulletproof plastic"), good transparency (light transmittance: over 90%), temperature resistant (-40~130°C).
High strength, wear-resistant, good oil resistance; divided into PA6, PA66, PA12, etc.
High-temperature resistant (continuous use at 120-150°C), good weather resistance, excellent electrical insulation
High rigidity, wear-resistant, good dimensional stability
Ultra-high temperature resistant (continuous use at 260°C, short-term use at over 300°C), chemically corrosion-resistant, good biocompatibility
Top-tier temperature resistance (long-term use at over 300°C), radiation-resistant, excellent insulation
Flame-retardant (UL94 V-0 rating), acid and alkali resistant, damp and heat resistant
Filter By:
As machined
As machined finish is a raw finish that displays machining marks from the machining process. As standard we machine to 3.2Ra, however you can specify the surface roughness down to 0.2Ra.
ABS
Visible tooling marks.
Protective UV Coating
As machined finish is a raw finish that displays machining marks from the machining process. As standard we machine to 3.2Ra, however you can specify the surface roughness down to 0.2Ra.
PC
Visible scratches.
Electroplating / electroless plating
As machined finish is a raw finish that displays machining marks from the machining process. As standard we machine to 3.2Ra, however you can specify the surface roughness down to 0.2Ra.
ABS
No visible scratches.
Painting
As machined finish is a raw finish that displays machining marks from the machining process. As standard we machine to 3.2Ra, however you can specify the surface roughness down to 0.2Ra.
Printing-2K PU
No visible scratches
Printing-UV
No visible scratches
Screen Printing/
Silk screen printing, also known simply as screen printing, is a versatile, widely used printing technique that transfers ink onto a substrate (e.g., fabric, paper, plastic, metal) through a porous mesh screen. A stencil blocks ink from passing through unwanted areas, while the open mesh allows ink to deposit onto the surface below—creating sharp, durable designs even on irregular or textured materials.
Screen Printing
No visible scratches
UV-cured coating
UV-cured coatings are formulations of photoreactive monomers/oligomers, photoinitiators, and additives that rapidly polymerize and crosslink into a hard, durable film when exposed to UV light (free-radical or cationic mechanisms), offering fast cure, low VOCs, and high hardness but requiring proper UV dosage and oxygen-management.
UV coating
No visible scratches
Water Transfer Printing/hydrographic printing
Water transfer (hydrographic) printing is a process where a printed PVA film floated on water is chemically activated and then transferred onto a primed part by dipping, followed by rinsing and clearcoating for protection.
No visible scratches
Water Transfer Printing
As machined finish is a raw finish that displays machining marks from the machining process. As standard we machine to 3.2Ra, however you can specify the surface roughness down to 0.2Ra.
Pad Printing
No visible scratches
Laser engraving
As machined finish is a raw finish that displays machining marks from the machining process. As standard we machine to 3.2Ra, however you can specify the surface roughness down to 0.2Ra.
Laser engraving
No visible scratches
Mold texturing
- Mold texturing (brushed, matte, leather, micro-texture): formed directly in the mold.
- Embossing/ debossing / stamp-in textures and logos.
Debossed logo
No visible scratches
