Surface Finishing Solutions
Anodizing
Anodized+ Sandblasted
Gold Plating
Gold Plating
Sandblasting
Sandblasting
Pressure knurling/cut,chip knurling
Pressure knurling/cut,chip knurling
Painting
Painting+UV Coating
Chromium plating/nickel plating/zinc plating
Chromium plating/nickel plating/zinc plating
Etching/Laser Engraving
Etching/Laser Engraving
Nitriding/QPQ
Nitriding/QPQ
Mirror Polishing/Electropolishing:
Mirror Polishing/Electropolishing:
Metallic painting finish
Sandblasting
Gold Plating
Gold Plated
Etching/Laser Engraving
Brushing
Brushed
Anodized +Sandblasted
Anodized +Sandblasted
blackening
Blackening
Logo Epoxy Doming
Logo Epoxy Doming
Spray painting with water-based coating
Spray painting with water-based coating
Logo Paint Filling
Logo Paint Filling
Pressure knurling/cut,chip knurling
Pressure knurling/cut,chip knurling
Nickel plating
Nickel plating+brushed
Chromium plating/nickel plating/zinc plating
Chromium plating/nickel plating/zinc plating
Color PVD plating
Color PVD plating+mirror polish
Nitriding/QPQ
Nitriding/QPQ
Stonewashed/patina finish
Mirror Polishing/Electropolishing:
Metallic painting finish
Metallic painting finish
Available materials
Available materials:
- Cold work mold steel 1.2379、1.2842、1.2080、1.2363
- Hot work mold steel 1.2344、1.2343、1.2581
- Alloy structural steel 5140/1.7035、4140/1.7225、4142、4340、5120/1.7147、4130/1.7218、4135、52100
- Plastic mold steel 1.2311/p20、1.2321、1.2738、1.2083
Carbon steel features low cost, good workability (weldable/stampable/heat-treatable), and controllable properties—its performance can be adjusted from soft-tough to hard-strong by modifying carbon content.
Available materials:
- （ASTM）1008、1010、1015、1020、1025、1040、1045、1050、G11170、G11440、4130、51100、52100、4140
- （JIS）：SKD1、SKD11、SKT4
Aluminium alloys have a high strength-to weight ratio, provide natural corrosion resistance, high electrical and thermal conductivity .
Available materials:
- Aluminium 5A01、5A02、5A03、5A05、5A06、5B06、5A12、5A30、5A33、5A41、5A42、5A66、5005、5019、5050、5251、5052、5154、5154A、5454、5154A、5754 、5056 、5356、5456 、5082、5182、5086
- Aluminium 6A02、6B02、6A51、6101、6101A、6005、6005A、6351、6060、6061、6063、6063A、6070、6181、6082
- Aluminium 7A01、7A03、7A04、7A05、7A09、7A10、7A15、7A19、7A31、7A33、7A52 、7003、7005、7020、7022、7050、7075
- Aluminium 4A03、4A11、4A13、4A17、4004、4032、4043
- Aluminium 3A21、3003、3103、3004、3005、3105
- Aluminium 2A01、2A02、2A04、2A06、2A10、2A11、2B11、2A12、2A13、2A14、2A16、2B16、2A17、2A20、2A21、2A25 、2A49、2A50、2A70、2A80、2A90、2004、2011、2014、2014A 、2214 、2017、2017A、2177、2218、2618、2219、2024、2124
- Aluminium 1A99、1A97、1A95、1A93、1A90、1A85、1A80、1A80A、1070、1070A、1370A、1060、1050、1050A、1A50、1350、1145、1350、1A30、1160、1200、1235
Stainless steel is characterized by high strength and excellent corrosion resistance.
Available materials:
- Stainless Steel 303
- Stainless Steel 304
- Stainless Steel 304L
- Stainless Steel 316
- Stainless Steel 316L
- Stainless Steel 405
- Stainless Steel 416
Copper is known for its high electrical and thermal conductivity, is flexible and durable.
Available copper varieties:
- Red copper(Pure Copper & Copper Alloys with Minimal Impurities) C10100、C10200、TP2、TP1
- Brass (Copper-Zinc Alloys) H68、C24000、C22000
- Bronze (Originally Cu-Sn Alloys; Now Refers to Cu Alloys Except Brass & Cupronickel) C60600、C61000、C50500、C51000、C52100
- Cupronickel (Copper-Nickel Alloys, Nickel as Main Alloying Element) C70600
Magnesium is a structural metal characterized by extreme lightness, high strength, and excellent natural corrosion resistance.
Available Alloys:
- Magnesium AZ31
- MAM61、MZK61
High strength-to-weight ratio, corrosion resistance, biocompatibility
Available Alloys:
- Ti-6Al-4V (Grade 5), Ti Grade 2, Ti Grade 5 ELI
1. Excellent comprehensive mechanical properties: balanced rigidity and toughness, good impact resistance (especially low-temperature impact, -40℃ still maintain toughness);
2. Easy processing: good melt fluidity, suitable for complex-shaped injection molding (e.g., thin-walled parts, intricate structures);
3. Good surface finish: easy to coat, print, or plate (e.g., electroplating to achieve metallic luster);
4. Cost-effective, but poor high-temperature resistance (long-term service temperature only 60~80℃) and poor weather resistance (easy to yellow or brittle under UV irradiation).
- Outstanding light transmittance (over 90%, close to glass)
- Wide temperature resistance range (-40℃~120℃), but weak chemical resistance
- Extremely high impact resistance
1. Good temperature resistance (long-term service temperature: 120~140℃), aging resistance;
2. Excellent electrical insulation, suitable for high-frequency scenarios;
3. Easy processing (good melt fluidity), but slightly weak impact resistance (often reinforced with glass fiber).
PET is a widely used thermoplastic polyester, available in two forms: amorphous PET (transparent, for packaging) and semi-crystalline PET (high-strength, for fibers/engineering parts). It is recyclable (marked as "Recycling Code 1").
1. Extremely strong comprehensive performance: high temperature resistance (long-term 240℃), impact resistance, chemical corrosion resistance
2. Good biocompatibility
3. Excellent dimensional stability, suitable for precision parts.
1. Excellent mechanical properties: high strength, high toughness, good impact and fatigue resistance;
2. Wear-resistant and self-lubricating: low friction coefficient, no additional lubrication required;
3. Good oil resistance, but high hygroscopicity.
1. High rigidity and hardness, mechanical properties close to metals;
2. Wear and fatigue resistance: no easy deformation during long-term use, stable friction coefficient;
3. Resistance to organic solvents, good dimensional stability (lower hygroscopicity than PA).
Polypropylene (PP) - PP is lightweight and has high chemical resistance, food safe, articulates well, impact resistant, touch and is environmentally friendly. Mainly used for; Packaging, stationary and automotive.
PVC is one of the most widely produced plastics globally, available in two main forms: rigid PVC (uPVC) and flexible PVC (modified with plasticizers). It is cost-effective and versatile.
Commonly called "acrylic" or "plexiglass," PMMA is a transparent thermoplastic valued for its optical clarity and weather resistance—often used as a substitute for glass.
Known by the trade name "Teflon," PTFE is a fluoropolymer famous for its extreme chemical inertness and low friction coefficient—often called the "non-stick plastic."
PPSU is a high-performance polysulfone engineering plastic, renowned for its exceptional heat resistance, toughness, and biocompatibility—ideal for demanding environments.
PS is a common thermoplastic with two main variants: general-purpose polystyrene (GPPS) (hard, brittle) and high-impact polystyrene (HIPS) (toughened with rubber). It is cost-effective and easy to process.