Blog
EDM Manufacturing Process of Thin-Wall0.3 Module Micro Straight Gears
Manufacturing Process of Thin-Wall Straight Gears
Thin-wall straight gears are widely used in aerospace prototype and t...
How many processing methods are there for Mylar insulating parts?
Mylar/Formex Insulation Parts: How Many Processing Methods Are There?
Have you ever encountered this situation when sourcing smal...
Why Some Rolled Parts Require Stamping Dies Instead of Roll Forming
Roll forming machines (plate rollers/roll-bending machines) are commonly used to produce cylinders and curved sheet parts, but not ever...
PVD, Electroplating, Spraying – Core Comparison
Understand at a glance: What are the differences between PVD, Electroplating and Spraying?
— Core comparison of 3 common surface trea...
Why Wire EDM Leaves a White or Oxide Layer on Parts?
Wire EDM (wire‑cut EDM / wire electrical discharge machining) is widely used for precision contours, mold inserts, punches, and hardene...
Reasons to Keep Entry Cutting Points on Scrap Material Not Workpiece
🔍 What exactly are we avoiding by “preventing entry-point burrs”?
In both laser cutting and wire EDM, the piercing/start point is whe...
What Products Are Suitable for Die Cutting Processing?
What is die-cutting?Die cutting is a precision manufacturing process that uses custom dies to cut, shape, and trim materials into fixed...
Structural Components|Hardware Stamping Parts Procurement
Breakdown of Material Costs for Hardware Stamping Parts: Stop Being Overcharged on Bulk Small Part Purchases
Having Mastered the Two ...
304 vs 316L Stainless Steel: What Happens If You Choose the Wrong One?
304 and 316L stainless steel look, feel and weigh almost the same. They cannot be distinguished by simple visual inspection. However, w...
How to Process Injection, Stamping and Die-casting Molds?
Many engineers lack familiarity with wire EDM (wire cut).When manufacturers suggest, "This part is better suited for wire cut," they o...